Hi boys,
So i have a customer who has a VS that for some reason doesn't like to start with key (but has central locking function most of the time)
Background is vehicle will not start unless the unlock button is pressed on FOB, which obviously "ok's" the security system through RF
But when the Unlock button doesn't work the car wont start. Which has left him stranded a few times.
I have pulled of shroud to inspect exciter ring and wiring, all looks ok and tight.
I have burnt a VATS deleted memcal but for some reason wont allow the vehicle to start unless again the unlock button is pressed.
Now VT-VY if VATS is removed you can start it with a non transponder key
But VS wont?
Is the way the security handles ignition and starter etc different on the VS compared to VT up?
This is the 3rd VS to not respond to a VATS delete memcal.
You can get them to start by bridging the starter relay with a VATS deleted memcal but cant seem to initiate start on key??
You VR VS gurus please help!
Thanks boys
VATS deleted memcals (VS)
-
- Posts: 3424
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: VATS deleted memcals (VS)
Ahh get a new key fob?
Clean the slip ring around the ignition and the steel bit on the key with a bit of steelo pad. Also make sure the slip rings are not pushed in so they make good contact with the key head.
Clean the slip ring around the ignition and the steel bit on the key with a bit of steelo pad. Also make sure the slip rings are not pushed in so they make good contact with the key head.
Re: VATS deleted memcals (VS)
assuming the key is in good nick, the issue will be on the circuit between the key reader and BCM, the bcm needs to put out earth to the starter relay for the car to start. If you earth the wire from the BCM the car will crank straight away.
If you find after doing that, that the car will crank but not fire straight away then there is certainly issue between the key and BCM that should be fixed. The BCM sends the 'ok to go' signal to the ECU to allow the injectors to fire.
I own a VS ute that has new key heads, key reader in good nick and all connections are fine. I assume the issue is the BCM itself (often a big delay between turning of key and cranking) i will replace or fix the BCM in this case but you could also just earth the relay wire and the issue would be solved.
If you find after doing that, that the car will crank but not fire straight away then there is certainly issue between the key and BCM that should be fixed. The BCM sends the 'ok to go' signal to the ECU to allow the injectors to fire.
I own a VS ute that has new key heads, key reader in good nick and all connections are fine. I assume the issue is the BCM itself (often a big delay between turning of key and cranking) i will replace or fix the BCM in this case but you could also just earth the relay wire and the issue would be solved.
According to chemistry, alcohol is a solution...
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: VATS deleted memcals (VS)
Right so if i get this right, the Vats delete will only affect the PCM portion ie Fuel injection, correct key key enables FI, incorrect disables FI.Biggvl wrote:assuming the key is in good nick, the issue will be on the circuit between the key reader and BCM, the bcm needs to put out earth to the starter relay for the car to start. If you earth the wire from the BCM the car will crank straight away.
If you find after doing that, that the car will crank but not fire straight away then there is certainly issue between the key and BCM that should be fixed. The BCM sends the 'ok to go' signal to the ECU to allow the injectors to fire.
I own a VS ute that has new key heads, key reader in good nick and all connections are fine. I assume the issue is the BCM itself (often a big delay between turning of key and cranking) i will replace or fix the BCM in this case but you could also just earth the relay wire and the issue would be solved.
Vats deleted memcal doesnt look at the key therefore will still enable injectors
BUT BCM also looks for the correct key, so if the correct key isnt present or unprogrammed it will not earth the starter relay at the BCM side therefore not allowing the starter to turn over?
am i on the right track there?
Re: VATS deleted memcals (VS)
correct
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: VATS deleted memcals (VS)
This has finally answered all my qeustions I've had with the Vr and vs as the vats seemThe1 wrote:correct
Never to work right.
Vt to vy seem to be fine with vats removals.
Thanks guys.
Now to trawl through the wiring diagrams to find out which pin is the earth on bcm side.
Or can I earth at relay?
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VATS deleted memcals (VS)
bypass the starter relay in the engine bay will fix the BCM controlling it if that's your only issue.hsv08 wrote:BUT BCM also looks for the correct key, so if the correct key isnt present or unprogrammed it will not earth the starter relay at the BCM side therefore not allowing the starter to turn over?
am i on the right track there?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VATS deleted memcals (VS)
This has been added to the FAQ.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: VATS deleted memcals (VS)
Excellentantus wrote:This has been added to the FAQ.
Thanks