Anyone have a complete pinout as per title?
I can only find one that states half the pins but not all of them. I have all the VR wiring diagrams but they still only show 3 or 4 of the wires out of the 7 there.
I need it so I can forward the VN/VP ALDL connections to the OBD style plug so I can not only data logging but all connections available.
So far I only have data, diag mode enable, GND and switched 12v +. There are a whole bunch more I have no info for and differ from the VN/VP colour codes except one.
Thanks in advance
Complete pinout for VR OBD?
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Complete pinout for VR OBD?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Complete pinout for VR OBD?
Thanks. Ok that's good then, absolutely none of the others I was wanting to know are relevant.
I only need the ones I already got 5, 6, 9 and 16.
The ALDL on the VN/VP has fuel pump, TCC and CEL output
I only need the ones I already got 5, 6, 9 and 16.
The ALDL on the VN/VP has fuel pump, TCC and CEL output
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.