12200411 PCM complete pinout

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
Post Reply
dzidaV8
Posts: 25
Joined: Fri Jun 02, 2017 6:07 am
cars: 2006 Pontiac GTO
1992 Pontiac Trans Am Convertible
1988 Pontiac Firebird L31 Vortec swap
Location: Poland

12200411 PCM complete pinout

Post by dzidaV8 »

Hello,

I'm trying to gather information about all the 12200411 PCM pins and functions available.

Here is a spreadsheet I created looking at wiring diagrams for some 2000-2002 LSx based cars and trucks. Does anyone have information to fill in the remaining blanks?

I'd especially like to know if there is an oil temperature sensor input available for logging, I know there's a PID to get oil temp value (GM PID 1602).
Attachments
411 PCM pinout.xlsx
(18.02 KiB) Downloaded 3237 times
User avatar
admiralhaye
Posts: 8
Joined: Mon Sep 18, 2017 7:10 am
cars: 67 Sedan DeVille

Re: 12200411 PCM complete pinout

Post by admiralhaye »

Don't have it in front of me, but I have alldata. I can pretty much pinout any pcm. Best I can remember there is not an oil temp circuit..... Will check tomorrow and get back with you.
User avatar
admiralhaye
Posts: 8
Joined: Mon Sep 18, 2017 7:10 am
cars: 67 Sedan DeVille

Re: 12200411 PCM complete pinout

Post by admiralhaye »

Seems like it matters the application. The first two are for 01 express van 5.7 the second two are for 02 k1500 5.3.
Attachments
IMG_20170918_124952048.jpg
IMG_20170918_124931933.jpg
IMG_20170918_124512963_HDR.jpg
IMG_20170918_124424925.jpg
Chas
Posts: 1
Joined: Mon Nov 09, 2015 1:32 pm

Re: 12200411 PCM complete pinout

Post by Chas »

Hi dzidaV8 again! haha,
I actually spent a lot of time comparing differences in wiring of the 0411 PCM for different cars/trucks. I'd like to add to this worksheet you have (for example, Pin 58 in the Red Connector 2 is for the Engine Oil Pressure Sensor Signal for only the Corvettes). I couldn't find anything about oil temperature in my collection of resources yet.
So a suggestion: could you change the header row titles for columns D and E from "Function", "Alternative Function" to the platform names instead? Like columns titled: "F-body", "Y-body", "GMT-800 Trucks", "GMT-600 Vans", (and there's more like the S10 and Trailblazers too)?
Trucks/Fbody/Ybody have some pins that were re-purposed differently (for example the HVAC controls).
And adding the GMT-600 column might be very helpful for the 24x LT1 crowd (people like me, haha).
Or if it's alright with you, I'll make these title edits and populate the workbook with what I've found.

Your thoughts?
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: 12200411 PCM complete pinout

Post by antus »

The Aussie VY Commodore (later model Commodores were released in the states as the Pontiac G8) '0411 pinouts are here: viewtopic.php?f=32&t=134#p21742

I havnt compared them to this list though, but could be considered as another implementation.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
yoda69
Posts: 1215
Joined: Sun Mar 15, 2009 10:20 am
cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual
Location: Geelong, VIC

Re: 12200411 PCM complete pinout

Post by yoda69 »

The G8 was the VE Commodore.
The LS1 was the Pontiac GTO (Aussie Monaro) in its first year before it got the LS2 in its second year.
Post Reply