VS-VY Enhanced Factory Bins
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
Yeah that would be good with the vy lean cruise. Stupid me plugged the aldl into the vy club sport trying to use the ls1 flash tool. Since than it’s been playing up. So I’ve either damaged the aldl or corrupted the driver
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
How do you set the IAT steps if the pcm is adding more steps due to logging? I assume it’s impossible with tunerpro? Tech2?immortality wrote:It's normal and the IAC should compensate for it to get back to the target idle rpm. For items that consume a large amperage (like thermofans or AC) the PCM will add extra steps to the IAC to compensate for the load on activation.
Re: The1's Enhanced Factory Bins
there are various tables to add or remove iac steps depending on what your trying to do.
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
That's a hard one because you have silenced the bus the low speed thermofan is on. I'd just take into account the number of steps it adds for the thermofan and work off that.Wade wrote:How do you set the IAT steps if the pcm is adding more steps due to logging? I assume it’s impossible with tunerpro? Tech2?immortality wrote:It's normal and the IAC should compensate for it to get back to the target idle rpm. For items that consume a large amperage (like thermofans or AC) the PCM will add extra steps to the IAC to compensate for the load on activation.
I use one of VL400's dataloggers which allows you to log silently, it only logs at half the data rate but it doesn't silence the bus so nothing extra running.
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
Cool thanks for that. Might need to get one
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
i got a log today, driving home from work. ive fitted a corvette servo but didnt really make much differance. same old sluggish 4l60e
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
Should only make a different on the 1-2 change. Maybe the trans is plain worn out? I know on our old VS chugging around town the trans was fine but as soon as you got up it it started to slip.
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
Trans seems ok in the vy but don’t really notice the corvette servo in it. On a 4l60 you do. Wouldn’t be surprised if it’s the ecu sensing it and correcting it to change as per normal. I fitted it more for towing to add extra clamp load and will doing the trans cooler as well
Re: The1's Enhanced Factory Bins
No.learning give it a few psi on gear change, there are 3 scalars default is 3psi set it to 6-8psi should help
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
chaned the power enrichment enable tps vs rpm. lean cruise time delay and enable temp. both force motor pressure-tps vs speed tables, just copied the vt v8 ones over and bumped 1-2 upshift preesure to 8psi.