BFPL

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
Post Reply
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

BFPL

Post by jenko »

I bought a 424 ecu from ebay and it has a BFPL memcal in it that does not apear to be tampered with (black base knock filter board and sticker still on eprom)so I read the bin and used the id tool and it is not recognised then compared it to the bfpl bin in the id tool data and it is totaly different
can some one shed some light on what the bin actually is
Attachments
bfpl from 424.bin
(64 KiB) Downloaded 298 times
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: BFPL

Post by delcowizzid »

bad read by the looks of it 1 or more pins not connecting
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: BFPL

Post by jenko »

read it again and all good How did you know it was a bad read?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: BFPL

Post by delcowizzid »

Recuring strange data over and over again when viewed in hex editor
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: BFPL

Post by jenko »

thanks
Post Reply