Vr v8 auto tune
Vr v8 auto tune
Im after a tune to suit my vr caprice v8 auto.
276 crane cam
3.45 gears
Finding specs on convertor
And any more info let me know what you need and go from there
Hope to hear from someone soon cheers.
276 crane cam
3.45 gears
Finding specs on convertor
And any more info let me know what you need and go from there
Hope to hear from someone soon cheers.
Re: Vr v8 auto tune
Hi mate, I've done a few with that cam they come up nice.
What memcal is fitted now?
What memcal is fitted now?
Re: Vr v8 auto tune
Had the nvram board installed but i need to order another one. Atm its just the factory memcal. Been off the road for a fair few years
Re: Vr v8 auto tune
Don't need to order new nvram just write a new cal.
Is 11P on it now?
Is 11P on it now?
Re: Vr v8 auto tune
Nah i mean its pretty beat up and needs to be re flashed. Prob just easier for a new one and that way will be in better condition. And yeah 11p
Re: Vr v8 auto tune
Im also going to attempt a t700 conversion and adding cable kickdown with lockup on a switch as ive got the box as a spare just sitting there. Otherwise it would just sit in the shed for another 5 years with nothing getting touched on it.
Dunno if it possible and if it is i dont know what effect it will have with the ecu.
If you have any opinion what so ever about going down that path let me know. Cheers
Dunno if it possible and if it is i dont know what effect it will have with the ecu.
If you have any opinion what so ever about going down that path let me know. Cheers
Re: Vr v8 auto tune
Have an old CAN loom anywhere? Even an old stuffed V6 one?
Re pin the VR auto loom and run the proper ECU then. Correct code and easy speed sensor wiring too.
Well worth a look at
Re pin the VR auto loom and run the proper ECU then. Correct code and easy speed sensor wiring too.
Well worth a look at
Re: Vr v8 auto tune
What you mean by can loom and proper ecu?
Re: Vr v8 auto tune
Ahh on my phone at smoking.
VN loom, use that for the ECU plugs and run a VR manual ECU.
VN loom, use that for the ECU plugs and run a VR manual ECU.
Re: Vr v8 auto tune
I do have vn loom but i think ive chopped bits off all my looms haha. Cant my loom be modded to suit. From memory its not just the trans with different plugs isnt there a fair bit else thats different aswell that i would have to change to suit vn loom also? I think ive only got a vr os vs v6 manual ecu. I thought auto ecu could be changed to manual?