ALDL Logger V2

160 And 8192 Baud Aldl
dusto
Posts: 109
Joined: Sun Mar 13, 2016 4:04 pm
cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike

Re: ALDL Logger V2

Post by dusto »

so am i reading right these awsome little bits of kit are no longer available
?
ejukated
Posts: 443
Joined: Wed Mar 04, 2009 8:52 pm

Re: ALDL Logger V2

Post by ejukated »

VL400 wrote:The VX one suits VY too, its the VY listen ADX that differs to VX as the dash data changes between models.

I have been talking to OZ38 on PM about this issue yesterday. Have tested the VX ADX on my software ALDL simulator program with a VY vehicle and VY PCM, and also a VT/VX/VY bench with PCM, cluster and BCM. It connects and logs ok but wont on his vehicle. Same with the listen ADX, works on the bench but wont on his car. Have asked OZ38 for the debug file from the logger, it may have some more clues as to what is going on if there is an ADX issue. Will get to the bottom of it!
What changes were required to get it to work on the VY?
0081
Posts: 186
Joined: Fri Jul 09, 2010 10:01 pm
cars: VY s L67
Haines Hunter - not a car but still a toy

Re: ALDL Logger V2

Post by 0081 »

ejukated wrote:
What changes were required to get it to work on the VY?
Keen to hear the answer to this also, i had issues with my V1 logger in my VY

would it be the same fix for the V1 and the V2 as OZ38 has the V2?
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: ALDL Logger V2

Post by VL400 »

I have updated the zip file in the first post with the modified ADX VX_DualA.adx.

The changes were to reduce the silence search to 15ms (was 50ms) and increase the delay between logging messages to 10ms (was 3ms)
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: ALDL Logger V2

Post by VL400 »

dusto wrote:so am i reading right these awsome little bits of kit are no longer available
?
Yeah there are no more available. I use a Logger V3 in my own car and may make these available in the future but it is fairly different to the V2 - no screen, no real user interface other than a single button and RGB LED, it is a permanent install logger that just automatically records.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: ALDL Logger V2

Post by Dylan »

I may part with mine in the near future
dusto
Posts: 109
Joined: Sun Mar 13, 2016 4:04 pm
cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike

Re: ALDL Logger V2

Post by dusto »

if you want to sell it mate hit me up id be keen
OZ38
Posts: 288
Joined: Wed Jul 01, 2009 7:18 pm
cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.

Re: ALDL Logger V2

Post by OZ38 »

VL400 wrote:I have updated the zip file in the first post with the modified ADX VX_DualA.adx.

The changes were to reduce the silence search to 15ms (was 50ms) and increase the delay between logging messages to 10ms (was 3ms)
Working great now on the VY V6.
Have done 4 logged & viewed them on TP for myself to see if I can find an issue.

Happy As :-)
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: ALDL Logger V2

Post by immortality »

Ok, I'm going to be using the Logger on a mates VR, he's wired a Innovative WB O2 (XML ?) into the car, Planning on swapping the tune over to 11p so I would just need to put the 0-5v output from the O2 into one of the analoge inputs on the logger and use the provided 11P_1Bar_AUX.ADX definition for the logger and be good to go?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: ALDL Logger V2

Post by delcowizzid »

Wire it into pin d8 11p has wideband unput
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Post Reply