VS 5.0 bin file help needed

General Tuning Questions And Discussions
Post Reply
Carbie
Posts: 15
Joined: Sun Jul 09, 2017 6:21 am
cars: HZ ute 327 chev
VR Senator 215i
02 Monaro LS1

VS 5.0 bin file help needed

Post by Carbie »

Hello everyone, i have posted a bin that i need to modify slightly but i can't work out how to read it, i have tried all xdf's (tunerpro)
Can anyone point me in the right direction please?
Attachments
VS 5.0L Auto.BIN
(64 KiB) Downloaded 257 times
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: VS 5.0 bin file help needed

Post by delcowizzid »

its a kalmaker workshop bin can see wds30 in the bin about halfway down using a hex editor.dont think theres any w30 xdfs around
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Carbie
Posts: 15
Joined: Sun Jul 09, 2017 6:21 am
cars: HZ ute 327 chev
VR Senator 215i
02 Monaro LS1

Re: VS 5.0 bin file help needed

Post by Carbie »

thanks Delco, is that the only way it can be read?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: VS 5.0 bin file help needed

Post by delcowizzid »

What are you trying to change might be able to find a few tables
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VS 5.0 bin file help needed

Post by Dylan »

If you can make up a basic XDF based around the mods Delco I'll convert it to a 12P bin if that helps.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: VS 5.0 bin file help needed

Post by Holden202T »

might be easier if someone has kalmaker can suck one the tables you want ?
Carbie
Posts: 15
Joined: Sun Jul 09, 2017 6:21 am
cars: HZ ute 327 chev
VR Senator 215i
02 Monaro LS1

Re: VS 5.0 bin file help needed

Post by Carbie »

i need to delete dtc 24 but also want to check/adjust the timing map
Post Reply