Hello everyone, i have posted a bin that i need to modify slightly but i can't work out how to read it, i have tried all xdf's (tunerpro)
Can anyone point me in the right direction please?
VS 5.0 bin file help needed
-
- Posts: 15
- Joined: Sun Jul 09, 2017 6:21 am
- cars: HZ ute 327 chev
VR Senator 215i
02 Monaro LS1
VS 5.0 bin file help needed
- Attachments
-
- VS 5.0L Auto.BIN
- (64 KiB) Downloaded 261 times
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VS 5.0 bin file help needed
its a kalmaker workshop bin can see wds30 in the bin about halfway down using a hex editor.dont think theres any w30 xdfs around
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 15
- Joined: Sun Jul 09, 2017 6:21 am
- cars: HZ ute 327 chev
VR Senator 215i
02 Monaro LS1
Re: VS 5.0 bin file help needed
thanks Delco, is that the only way it can be read?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VS 5.0 bin file help needed
What are you trying to change might be able to find a few tables
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VS 5.0 bin file help needed
If you can make up a basic XDF based around the mods Delco I'll convert it to a 12P bin if that helps.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VS 5.0 bin file help needed
might be easier if someone has kalmaker can suck one the tables you want ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 15
- Joined: Sun Jul 09, 2017 6:21 am
- cars: HZ ute 327 chev
VR Senator 215i
02 Monaro LS1
Re: VS 5.0 bin file help needed
i need to delete dtc 24 but also want to check/adjust the timing map