wanted scania eddy current retarder

Hardware and Software. If you have something to sell, post it here.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

wanted scania eddy current retarder

Post by delcowizzid »

as the title says im after a used scania eddy current retarder for a little project :mrgreen: preferably in NZ they weigh about 300kg LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: wanted scania eddy current retarder

Post by Holden202T »

WTF?!?!?!
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: wanted scania eddy current retarder

Post by The1 »

makin your own dyno there hey delco, have you checked out the wreckers yet?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: wanted scania eddy current retarder

Post by delcowizzid »

hehe yeah engine dyno on the go. finding it hard to tune high boost on the street and have a couple of projects that umm stick out on the street you could say LOL built for straight lines only.have a mate who fixes scania busses hopefully he just has one lying in the scrap somewhere but i doubt it .they are a touch expensive brand new
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
devojet
Posts: 1
Joined: Thu Oct 08, 2009 9:05 pm
cars: 26 chev hot rod, VE sportswagon.

Re: wanted scania eddy current retarder

Post by devojet »

Hey Delco,

If you find a second one or one in Australia that you don't want let me know. I currently have a Vane rolling road with air powered disk brakes. I have built my own computer based controller for it to do closed loop speed control and data logging etc but I'm finding the air brakes don't respond quick enough.

Cheers

Daniel.
norm426
Posts: 27
Joined: Wed May 26, 2010 7:42 am
cars: Too Many!
Location: Melbourne, Australia

Re: wanted scania eddy current retarder

Post by norm426 »

I have a telma retarder 310 model i think from memory, not sure if i want to get rid of it tho

I did another post about my dyno also, https://pcmhacking.net/forums/viewtopic.php?f=36&t=208

What i would really like to do is get involved with someone in melbourne who shares the buzz

I wanted to pull the water brake off the chassis dyno and make an engine dyno, then fit the telma to the chassis dyno; but i just dont have the time.

If any one feels they were keen to continue the project, i would support it
User avatar
TTVN
Posts: 194
Joined: Tue Jun 30, 2009 10:01 pm
cars: TT 355 VN, Rearmount turbo 355 vp, cammed 355 hj60 landcruiser, vx clubby n efilive VZ ls1 wagon

Re: wanted scania eddy current retarder

Post by TTVN »

im currently looking for telma retarder in AU as well something around cc135-cc160 ish
Paul Mulcahy
Posts: 14
Joined: Fri Sep 06, 2013 12:23 am
cars: Austin lancer Chevy nova

Re: wanted scania eddy current retarder

Post by Paul Mulcahy »

TTVN wrote:im currently looking for telma retarder in AU as well something around cc135-cc160 ish
i picked this up for $1000
Attachments
IMG_5493.PNG
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

Re: wanted scania eddy current retarder

Post by MAGP »

Thread dig :thumbup:
Just found this on gumtree https://www.gumtree.com.au/s-ad/campbel ... 1135200826
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: wanted scania eddy current retarder

Post by The1 »

then set these up for your rollers lol
https://www.gumtree.com.au/s-ad/campbel ... 1143142148
Post Reply