hey does anyone have ideas to why my i can only connect to my NVRam after hitting hardware, and the states coming up all over the place? recorded how it was going with and without the rw jumper on if that makes any difference to logs, i also reved about half way through each test aswell,
i havent changed the NVram yet thats still with standard 1enhanced for a vs s/c and im using an envoys cable
connecting issue
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
connecting issue
- Attachments
-
- NVRam without jumper.xdl
- (11.14 KiB) Downloaded 409 times
-
- nvram with RW jumped.xdl
- (33.02 KiB) Downloaded 404 times
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: connecting issue
That shouldnt be the case. Maybe Tazzi can help with that cable.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- InspectorCabbage
- Posts: 21
- Joined: Sun May 20, 2018 12:33 pm
- cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto - Location: Bacchus Marsh Vic
Re: connecting issue
How do i get incontact with Tazzi?antus wrote:That shouldnt be the case. Maybe Tazzi can help with that cable.
- oldn64
- Posts: 256
- Joined: Mon May 28, 2018 5:05 pm
- cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
- Location: Country Victoria on a direct road to WINTON
Re: connecting issue
There are a number of ways,InspectorCabbage wrote:How do i get incontact with Tazzi?antus wrote:That shouldnt be the case. Maybe Tazzi can help with that cable.
you can pm him here.
you could ring him on his mobile (located on his website) please for his sake remember he is in WA so if you are eastern states then you need to ring later in the day otherwise you will awake him from his slumber
Cheers
oldn64
Re: connecting issue
Give me a call during work hours or send an emailInspectorCabbage wrote:How do i get incontact with Tazzi?antus wrote:That shouldnt be the case. Maybe Tazzi can help with that cable.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726