vx l67 ski boat problems
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: vx l67 ski boat problems
It sounds like electrical noise. I'd be checking the wiring thats not part of the EFI, and the cable routing. Look closely at everything high voltage or high current. Even run it up in the dark and look for arcing.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: vx l67 ski boat problems
OK i was wrong! Theft deterrent was still on. Turned it off and engine started. Keeps throwing up the comms error 31 randomly, and I don't get a MAf reading on the tuner pro dashboard. MAF wires test OK, one live, one earth and the signal wire to ecu has continuity. Doesn't give an error code until you unplug it. Tried another unit and still no reading.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vx l67 ski boat problems
31 is theft deterant error code can be turned off.what adx are you using in tunerpro
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: vx l67 ski boat problems
A5%20Engine%20and%20trans%20TP5%20v105.adx
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vx l67 ski boat problems
Use the adx in the enhanced download package
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: vx l67 ski boat problems
also getting ccp driver failure code. Also don't understand why I am getting MAF readings when I unplug it.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vx l67 ski boat problems
Probably cause you are using the wrong adx for logging the enhanced code has bigger maf tables than stock and other mods and has its own adx
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: vx l67 ski boat problems
downloaded the enhanced package and loaded the adx file, but can't connect. The indicator flashes from blue to red alternatively and logs heaps of errors.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vx l67 ski boat problems
Tick the rs232 echo flag in the adx
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: vx l67 ski boat problems
Or in the plugin settings in tunerpro there is an echo setting
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem