265 Hemi to efi
Re: 265 Hemi to efi
Thanks for the replies, it’s more of an experiment than anything. I have a spare motor and other efi hardware bits lying around and Want to put together a sequential EFI setup for cheap.
Re: 265 Hemi to efi
Hi all, this area had been annoying me for a while and I knew there was something ugly under there. They must of had a rear quarter replaced and where they joined the two panels together was a ton of bog. They just caved the two panels in and stitch welded. When I cut it open it came back a lot closer to the correct position so not so much filler was required. Once I welded it together I filled the welded join area with reofill so its no to be problem again.
Still a bit of work required on the body line.
Still a bit of work required on the body line.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 265 Hemi to efi
nice job, looked pretty dodgy before hand!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: 265 Hemi to efi
Thanks Sam, just has got me stuffed why they caved it in so far and why they plug welded it. It took me about 15 minutes to weld it properly. I ground about 1/2 an inch of bog out of the repair and put back in a couple of mm of reofill.
-
- Posts: 155
- Joined: Wed Jan 07, 2015 1:21 pm
- cars: hj ute, hz wagon, copious amounts of random half started side projects
- Location: Mid North Coast
Re: 265 Hemi to efi
looks alot better, even for a northshore volvo , its crazy some of the old repairs that were done back in the day
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
Re: 265 Hemi to efi
Ha, ha haven't heard that term for a Val before.Macca97 wrote:looks alot better, even for a northshore volvo , its crazy some of the old repairs that were done back in the day
Re: 265 Hemi to efi
Also called a "Marrickville Mercedes"heff0018 wrote:Ha, ha haven't heard that term for a Val before.Macca97 wrote:looks alot better, even for a northshore volvo , its crazy some of the old repairs that were done back in the day
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
Re: 265 Hemi to efi
Ha, yeah reckon I have heard thAt term before
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: 265 Hemi to efi
That repair looks like ones still getting done in local backyards around here. Ended up nice.