Bought one of these for a play good quality board can't wait to have mess around might start small and build a motorbike size roller setup.
https://ardyno.weebly.com/?fbclid=IwAR0 ... r7YgGygBvg
Ardyno arduino inertia dyno interface board
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Ardyno arduino inertia dyno interface board
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 2882
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Ardyno arduino inertia dyno interface board
Thats really cool, be interested to hear how it goes & that guy's videos all look pretty cool!
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ardyno arduino inertia dyno interface board
That is really cool. Theres a couple of guys here at work in to model car racing who take it pretty seriously and ive heard them mention RC dynos so I'll see if they've heard of it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Ardyno arduino inertia dyno interface board
Arduino uno turned up today .sketch uploaded everything powers on ready to hook up a hall effect sensor and test
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Ardyno arduino inertia dyno interface board
no using headphones ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Ardyno arduino inertia dyno interface board
Headphones work into the software via soundcard without using the arduino but blowing doesn't give a nice curve hahaha want to test the actual ardyno have a Honda dizzy here see if I can't spin that
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem