Ardyno arduino inertia dyno interface board

Information and discussion of EFI hardware and specifications
Post Reply
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Ardyno arduino inertia dyno interface board

Post by delcowizzid »

Bought one of these for a play good quality board can't wait to have mess around might start small and build a motorbike size roller setup.
https://ardyno.weebly.com/?fbclid=IwAR0 ... r7YgGygBvg
20190506_131249.jpg
20190511_161425.jpg
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Ardyno arduino inertia dyno interface board

Post by VX L67 Getrag »

Thats really cool, be interested to hear how it goes & that guy's videos all look pretty cool!
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Ardyno arduino inertia dyno interface board

Post by antus »

That is really cool. Theres a couple of guys here at work in to model car racing who take it pretty seriously and ive heard them mention RC dynos so I'll see if they've heard of it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Ardyno arduino inertia dyno interface board

Post by delcowizzid »

Arduino uno turned up today .sketch uploaded everything powers on ready to hook up a hall effect sensor and test
20190513_154809.jpg
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Ardyno arduino inertia dyno interface board

Post by Holden202T »

no using headphones ? :D
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Ardyno arduino inertia dyno interface board

Post by delcowizzid »

Headphones work into the software via soundcard without using the arduino but blowing doesn't give a nice curve hahaha want to test the actual ardyno have a Honda dizzy here see if I can't spin that
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Post Reply