vt v6 with vr ecu
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
vt v6 with vr ecu
Quick question have mate with a vt v6 engine can he run it with a 16183082 with blcd 5077 with the vr harness with no bcm ? given I turn off vats
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vt v6 with vr ecu
i would use the custom tune i made for an ecotec with $12P but yes it should work.
you need to add/change a few sensors but other than that its pretty much plug and play....
i assume this is a manual gearbox too ?
you need to add/change a few sensors but other than that its pretty much plug and play....
i assume this is a manual gearbox too ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: vt v6 with vr ecu
Yes manual gearbox , so I could burn 12p straight to existing eprom after uv erase which sensors need changing/adding ?
also is this suggested tune download/file.php?id=9834
also is this suggested tune download/file.php?id=9834
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vt v6 with vr ecu
yep thats the tune.
now your testing me, the CTS is different, but you could also change the tune to suit the ecotec CTS.
knock sensor needs to be the earlier type, they fit the same but its a different unit.
need to add a MAT sensor and of course MAP sensor.
now your testing me, the CTS is different, but you could also change the tune to suit the ecotec CTS.
knock sensor needs to be the earlier type, they fit the same but its a different unit.
need to add a MAT sensor and of course MAP sensor.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: vt v6 with vr ecu
Cheers 202