vt v6 with vr ecu

General Tuning Questions And Discussions
Post Reply
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

vt v6 with vr ecu

Post by jenko »

Quick question have mate with a vt v6 engine can he run it with a 16183082 with blcd 5077 with the vr harness with no bcm ? given I turn off vats
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: vt v6 with vr ecu

Post by Holden202T »

i would use the custom tune i made for an ecotec with $12P but yes it should work.

you need to add/change a few sensors but other than that its pretty much plug and play....

i assume this is a manual gearbox too ?
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: vt v6 with vr ecu

Post by jenko »

Yes manual gearbox , so I could burn 12p straight to existing eprom after uv erase which sensors need changing/adding ?
also is this suggested tune download/file.php?id=9834
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: vt v6 with vr ecu

Post by Holden202T »

yep thats the tune.

now your testing me, the CTS is different, but you could also change the tune to suit the ecotec CTS.

knock sensor needs to be the earlier type, they fit the same but its a different unit.

need to add a MAT sensor and of course MAP sensor.
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: vt v6 with vr ecu

Post by jenko »

Cheers 202
Post Reply