265 Hemi to efi
Re: 265 Hemi to efi
There is still a blue light showing when ignition is turned on.
Is Jayme still the go to person for hardware. Thanks
Is Jayme still the go to person for hardware. Thanks
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 265 Hemi to efi
Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: 265 Hemi to efi
Thanks Delcowizzid I will check tonight.delcowizzid wrote:Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off
Re: 265 Hemi to efi
Yep, blue light stays on for around 2 seconds after the ignition turned off
Re: 265 Hemi to efi
Is that a good sign?delcowizzid wrote:Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off
I was looking back through my old posts and hopefully it has just corrupted the NVRAM like it did previously. Now I just got to find my burner.
Cheers
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 265 Hemi to efi
It means that there's code running on the ecu it's not fully corrupted but it doesn't mean to say that some part of the tune is not right
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: 265 Hemi to efi
Thanks for the reply, cheers
Re: 265 Hemi to efi
Good news, my new burner (couldn’t find my old one) turned up today and I was able to burn the stacked bin file to the NVRAM and get TunerPro to find the Hardware. Once TunerPro was connected I was able to load the last tune and it fired up.
Big relief to hear it running again.
Both The burner and laptop will be staying with the car from now on.
Big relief to hear it running again.
Both The burner and laptop will be staying with the car from now on.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 265 Hemi to efi
Always burn a tune to a memcal and leave in the glovebox as a get you home in a pinch backup
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: 265 Hemi to efi
delcowizzid wrote:Always burn a tune to a memcal and leave in the glovebox as a get you home in a pinch backup
Thanks, that sounds like a better option than burning on the go