Can someone help?

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Troy
Posts: 19
Joined: Thu Jul 11, 2019 10:02 am
cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual

Can someone help?

Post by Troy »

Ive got a holden 304 with a 4761 cam installed but it's running std tune and running really rough and fouling the plugs I've got all the tuning gear to burn a new memcal ect just winding if anyone can help me with the changes I need to make to get it running okay to be able to take it to the dyno in a few weeks I'd really appreciate if anyone could help
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Can someone help?

Post by Holden202T »

get the bin file from the car with the flash tool, zip it up and upload it here, then someone might be able to go from there for you.
Troy
Posts: 19
Joined: Thu Jul 11, 2019 10:02 am
cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual

Re: Can someone help?

Post by Troy »

Holden202T wrote:get the bin file from the car with the flash tool, zip it up and upload it here, then someone might be able to go from there for you.
His the current bin file the car is running on and cam specs below if anyone can help me I'd really appreciate it
Attachments
20190725_202409.jpg
20190725_202409.jpg (100.86 KiB) Viewed 3128 times
11P Manual Vl wagon.bin
(64 KiB) Downloaded 191 times
oss96
Posts: 22
Joined: Sun Oct 25, 2015 5:08 pm
cars: 96 Vs ss manual
97 Vs v8 Calais
09 Ve ssv manual
17 vf ssv redline manual
Location: Central Queensland

Re: Can someone help?

Post by oss96 »

Is the engine standard apart from the cam? Or modified? Compression, heads? etc..
That's a fair sized cam for a 304, tight seperation angle too.
Troy
Posts: 19
Joined: Thu Jul 11, 2019 10:02 am
cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual

Re: Can someone help?

Post by Troy »

oss96 wrote:Is the engine standard apart from the cam? Or modified? Compression, heads? etc..
That's a fair sized cam for a 304, tight seperation angle too.
The engine has shaved heads , 040 oversized pistons , little head work it drives okay and has lots of power just does idle great and is fouling the plugs really bad atm
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Can someone help?

Post by Dylan »

Before running a new tune probably need to replace the plugs. They're generally dead at this point.
Also check the oil isn't diluted with petrol.
Troy
Posts: 19
Joined: Thu Jul 11, 2019 10:02 am
cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual

Re: Can someone help?

Post by Troy »

Dylan wrote:Before running a new tune probably need to replace the plugs. They're generally dead at this point.
Also check the oil isn't diluted with petrol.
Okay mate defiantly gonna change plugs and oil first. Is anti vats switched off in this tune? And what xdf suits ?
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Can someone help?

Post by Dylan »

VATS off yes, 12P V1.12
Troy
Posts: 19
Joined: Thu Jul 11, 2019 10:02 am
cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual

Re: Can someone help?

Post by Troy »

Dylan wrote:VATS off yes, 12P V1.12

Okay cause I just tried the bin file and couldn't even took up to the computer and was in limp mode
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Can someone help?

Post by antus »

The original bin up there is 11P, not 12P. It'll be a '424 computer and 12P wont be compatible.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply