Can someone help?

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Troy
Posts: 19
Joined: Thu Jul 11, 2019 10:02 am
cars: Factory vl v8 wagon
Vl v8 wagon burnout car
Supercharged vt l67 manual

Re: Can someone help?

Post by Troy »

antus wrote:The original bin up there is 11P, not 12P. It'll be a '424 computer and 12P wont be compatible.

I have a ecu from a vs v8 series 1 and the bin file Dylan sent me to try was 12p but it fired up in limpmode and couldn't even hook the laptop upto it the bin file is below
Attachments
D8.bin
(64 KiB) Downloaded 177 times
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Can someone help?

Post by Holden202T »

VS V8 Auto = 424 computer
VS V8 Manual = 082 computer

you need to know what you have to get the right tune file for it.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Can someone help?

Post by antus »

424 and 082 etc are the last 3 numbers in the service number (its too hard to remember and type the whole thing, so the internets have settled mostly on this).
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply