VN ecu wiring and plugs

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
ladaok
Posts: 96
Joined: Mon Jun 09, 2014 12:45 pm
cars: none

VN ecu wiring and plugs

Post by ladaok »

Is the loom & plugs to / from from a VN model V8 ok to use for my 4 cylinder project using te ' 8o8 ' ?
...ta
User avatar
Gareth
Posts: 2505
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: VN ecu wiring and plugs

Post by Gareth »

Yes, they're all the same :thumbup:
According to chemistry, alcohol is a solution...
ladaok
Posts: 96
Joined: Mon Jun 09, 2014 12:45 pm
cars: none

Re: VN ecu wiring and plugs

Post by ladaok »

Ta.... I am realizing there is lots of info here that either I haven't read or have forgotten ... in fact probably enough to get myself going on a laptop, I am re reading all the set up / startup posts, ....if anyone wants to chip in with a logical sequence of instructions for a bunny, feel free to add your pennies worth
User avatar
Gareth
Posts: 2505
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: VN ecu wiring and plugs

Post by Gareth »

Start with the green FAQ button, read and re-read :thumbup:
According to chemistry, alcohol is a solution...
User avatar
antus
Site Admin
Posts: 8239
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VN ecu wiring and plugs

Post by antus »

The v8 loom is fine, the mods you'll need will be less injectors (obviously), and the v8 ignition module has different connectors. The 808 is the same 4 wire interface to the various modules though, so you can replace put the connectors you need on the loom for the ignition module you plan to run.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply