DELCOS NEW RIDE

Post Your Delco Powered Ride Here
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: DELCOS NEW RIDE

Post by vlad01 »

:thumbup: :driving:
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: DELCOS NEW RIDE

Post by Holden202T »

the motor you have has variable inlets only then, so you can probably look and see if you can put the inlet cam gears on the exhaust, then it will be no variable, then assuming you can get a module to read the crank trigger i cant see why it wouldn't work.

they are a returnless fuel system but i reckon you'd be able to put a fitting on the end of the rail to sort that out.

i've seen a VZ with 12psi and e85 running 450hp at the wheels with a beefed up 4l60e!

the only real issue with them is the one piece timing cover, means if you need to change comp = head mods or pistons other than that goot strong bottom end and all alloy with good flowing heads!
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: DELCOS NEW RIDE

Post by vlad01 »

with engine work and boost you will see some big numbers. These engines are capable of revving over 9k with some work so its easy to make big numbers.

The Cadillac race spec engine makes 600hp with twin turbos and 18psi iirc.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: DELCOS NEW RIDE

Post by delcowizzid »

There's 1 here its the later model with exhaust manifold built in the heads went 750rwhp
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: DELCOS NEW RIDE

Post by delcowizzid »

Circuit car
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: DELCOS NEW RIDE

Post by vlad01 »

nice!
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: DELCOS NEW RIDE

Post by delcowizzid »

Also some new equipment for the rest of the fab work
received_1179394845587781.jpeg
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: DELCOS NEW RIDE

Post by Holden202T »

:thumbup: :punk:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: DELCOS NEW RIDE

Post by delcowizzid »

It's bigger and taller than a buick need more trimming before the bonnet will shut but it's in there
20191011_190706.jpg
20191011_190700.jpg
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: DELCOS NEW RIDE

Post by vlad01 »

yep, OHC will do that.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Post Reply