WARNING HP Tuners MPV1 DEAD
Re: WARNING HP Tuners MPV1 DEAD
[highjack]
Does the older versions (< 4.0 ) save bins, I mean can you open a bin, modify it and save it ... No credits.
Does the older versions (< 4.0 ) save bins, I mean can you open a bin, modify it and save it ... No credits.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: WARNING HP Tuners MPV1 DEAD
no
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: WARNING HP Tuners MPV1 DEAD
Bummer, Thanks Antus
Obviously trying to find a way to tickle variables to point them out ...
Obviously trying to find a way to tickle variables to point them out ...
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: WARNING HP Tuners MPV1 DEAD
I wish I had read this prior to lending it to my friend that has 4.0.
Only lent it as his one died and he had to keep the dyno going while his v2 was sent out.
I haven't used hp tuners since 3.3 as I use PCMTEC these days.
The guys at vcm said that once it is used on 4.0 and onwards it no longer can be used on a 3 version of the program..
Does anyone know what updated the cable as I was told there was no normal ok to update firmware as hp use to have.
Only lent it as his one died and he had to keep the dyno going while his v2 was sent out.
I haven't used hp tuners since 3.3 as I use PCMTEC these days.
The guys at vcm said that once it is used on 4.0 and onwards it no longer can be used on a 3 version of the program..
Does anyone know what updated the cable as I was told there was no normal ok to update firmware as hp use to have.
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: WARNING HP Tuners MPV1 DEAD
it does it automatically - there is no way to stop it. it happened to mine but failed during the update.
i managed to bring it back by plugging it into a laptop that had an old V3 on there. even the latest V4 that killed it kept failing when trying to repair/update
i managed to bring it back by plugging it into a laptop that had an old V3 on there. even the latest V4 that killed it kept failing when trying to repair/update
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: WARNING HP Tuners MPV1 DEAD
sounds like a great system!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- ShorTuning
- Posts: 55
- Joined: Thu Dec 13, 2018 4:42 pm
- cars: 2002 Camaro
2002 Formula - Location: On the Dyno
- Contact:
Re: WARNING HP Tuners MPV1 DEAD
I use it everyday and am fully up to date on version with no issues on my MPVI1 Pro cable.
It did suck they took away opening *.bin files in the software but using a bench PCM to flash/pull get's around that. Just a little more time consuming.
It did suck they took away opening *.bin files in the software but using a bench PCM to flash/pull get's around that. Just a little more time consuming.
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: WARNING HP Tuners MPV1 DEAD
Thats a REALLY long video... clift notes would be great
Re: WARNING HP Tuners MPV1 DEAD
In short, was telling people to stop asking him to downgrade their device which was bricked from using hacked software.VX L67 Getrag wrote:Thats a REALLY long video... clift notes would be great
And also name/shamed a guy that owns a tuning shop.
Annnnnnnnnddddd went on to explained the reason to why what he is doing is legal ect ect.
Was quite amusing to listen to. Just had it rolling in the background while programming.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726