fuel map changing
fuel map changing
i have since fitted new injectors to my car and used the kinjflow calculator to get correct values but ecu keeps doing weird stuff and making my idle rich and load tables lean. the injector i have fitted will defiantly not max out on this engine combo but in the tables at wot numbers are set very high to run correct
Re: fuel map changing
also iac postion likes to change itself around heaps on the aeroflow 4 barrel tb anyone else had these issues?
Re: fuel map changing
Don't get to caught up on the IAC operating while driving, it's meant to.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: fuel map changing
Did you change the voltage offset table to suit the injectors what kind did you have and what did you fit
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: fuel map changing
Do you have a wideband O2 sensor fitted?
Re: fuel map changing
Yes injector offset has been changed and wideband is fitted. Seems fine today yesterday no so much.