V6 ability for pcm hammer.

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: V6 ability for pcm hammer.

Post by Holden202T »

just FYI i probed the pins 58/59 and they seems to be connected, not sure why different PCM's use different wires but yeah either will work fine.
Vampyre
Posts: 261
Joined: Wed Dec 06, 2017 1:02 pm
cars: grand am, trans am

Re: V6 ability for pcm hammer.

Post by Vampyre »

anyone tinkering still
Vampyre
Posts: 261
Joined: Wed Dec 06, 2017 1:02 pm
cars: grand am, trans am

Re: V6 ability for pcm hammer.

Post by Vampyre »

Holden202T wrote:just FYI i probed the pins 58/59 and they seems to be connected, not sure why different PCM's use different wires but yeah either will work fine.
some use both, one for obd connector and other goes to different modules
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: V6 ability for pcm hammer.

Post by antus »

Ive been busy the last couple of weekends but I did get my first P04 to come to life.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Vampyre
Posts: 261
Joined: Wed Dec 06, 2017 1:02 pm
cars: grand am, trans am

Re: V6 ability for pcm hammer.

Post by Vampyre »

how you manage that
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: V6 ability for pcm hammer.

Post by Tazzi »

Mine should pop up shortly.

so just to check, you managed to get the P04 responding back with the micro kernel edit you have done?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Vampyre
Posts: 261
Joined: Wed Dec 06, 2017 1:02 pm
cars: grand am, trans am

Re: V6 ability for pcm hammer.

Post by Vampyre »

gampy is actually the one that got things talking with kernel, we have a read kernel using an avt cable. Its to big to work on devices only capable of 2048 uploads
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: V6 ability for pcm hammer.

Post by antus »

@vampyre - i missed that i had current limiting on, on the bench psu and it was under powered. Setup error on my part :(

Next we need to know which branch were developing on and put the p04 setup stuff and configuration stuff in (or build on the work thats done already), then build on gampys kernel work. Im currently thinking we might need to write the p04 kernel in asm to keep it small enough, but we have to build the bridge to that part of develpment first. @nsfw - is there a recommended branch we should build this in?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Vampyre
Posts: 261
Joined: Wed Dec 06, 2017 1:02 pm
cars: grand am, trans am

Re: V6 ability for pcm hammer.

Post by Vampyre »

antus, he already setup a p04 branch on github
User avatar
Gampy
Posts: 2331
Joined: Sat Dec 15, 2018 7:38 am

Re: V6 ability for pcm hammer.

Post by Gampy »

Just got an odd result ... At least odd from my short timer experience with these PCM's.

Using the Seed/Key from Holden202T's PCM
[09:02:13:400] Sending unlock request (B805, DB48)
Returns an Algorithm Index of 40 not 14 as expected.
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Post Reply