kur4o wrote:
Writing will be the same as p01 and p59 intel and amd chips except for the following changes:
Code: Select all
chip init Load $0006 - word_fffffa4c $6820 - word_fffffa4a $7020 - word_fffffa4e $0006 - word_fffffa48 For intel chip only: before erase or program bitset #0 word_ffffe2fa wait till bit #5 is set at word_fffffa19 after erase or program bitclear #0 word_ffffe2fa wait till bit #5 is cleared at word_fffffa19 amd chip id 22AB segments 0 2000 4000 6000 8000 10000 20000 30000 40000 50000 60000 70000
V6 ability for pcm hammer.
Re: V6 ability for pcm hammer.
i was going to attempt this but cant find were its at in code to edit it
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: V6 ability for pcm hammer.
Its through the flash.c flash.h flash_intel.c and flash_amd.c files but you might not be able to see it because its split out in to different functions and written in C with more detailed wording as to whats what.
https://github.com/LegacyNsfw/PcmHacks/ ... op/Kernels
For example, you see FFFFE2FA mentioned above, and thats here https://github.com/LegacyNsfw/PcmHacks/ ... lash.h#L11 so when you see a mention of HARDWARE_IO in the C, that is the address its referring to.
https://github.com/LegacyNsfw/PcmHacks/ ... op/Kernels
For example, you see FFFFE2FA mentioned above, and thats here https://github.com/LegacyNsfw/PcmHacks/ ... lash.h#L11 so when you see a mention of HARDWARE_IO in the C, that is the address its referring to.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: V6 ability for pcm hammer.
Just gonna leave these here.......
Had to make a few tweaks since I was doing this over Bluetooth but it ended up working....
There are a LOT of things that were a bit sketchy and it had to request a number of blocks multiple times but given the number of possible variables that could have been the cause and the fact I not only hacked a kernel from Ls Droid into this but also hacked an OBD Xpro VT in using Elm commands over Bluetooth I'm pretty amazed it even worked - antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: V6 ability for pcm hammer.
Keep in mind that is a very old version of the pcmhammer code base, and not a kernel are likely to use. It is very cool to see, but it doesnt mean v6 support is nearly ready. P59 full flash support nearly is, and that is what we have been looking at first. Once thats out, and time permitting we'll move on to P04.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: V6 ability for pcm hammer.
Wow 160plus,
COM16 ... Need some port cleaning??
If interested here are the steps ... If not maybe someone else does!
Open Admin prompt ...
Type,Select: View
Select: Show hidden devices
Expand: Ports (COM & LPT)
Then start cleaning ...
I typically delete them all and allow what gets used to reinstall.
Hopefully that is useful to someone ...
COM16 ... Need some port cleaning??
If interested here are the steps ... If not maybe someone else does!
Open Admin prompt ...
Type,
Code: Select all
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
devmgmt.msc
Select: Show hidden devices
Expand: Ports (COM & LPT)
Then start cleaning ...
I typically delete them all and allow what gets used to reinstall.
Hopefully that is useful to someone ...
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: V6 ability for pcm hammer.
antus wrote:Keep in mind that is a very old version of the pcmhammer code base, and not a kernel are likely to use. It is very cool to see, but it doesnt mean v6 support is nearly ready. P59 full flash support nearly is, and that is what we have been looking at first. Once thats out, and time permitting we'll move on to P04.
yeah just nice to see it is possible
Re: V6 ability for pcm hammer.
Did you know that Windows will only allow 256 comports? Ask me how I knowGampy wrote:Wow 160plus,
COM16 ... Need some port cleaning??
Re: V6 ability for pcm hammer.
Yup I did, however I don't think we learned that the same way ...160plus wrote:Did you know that Windows will only allow 256 comports? Ask me how I know
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: V6 ability for pcm hammer.
Vampyre wrote:Here is a complete list of every P04 OSID I could find from GM its about 1400 from 98-05 also sorted them by yr and hardware found in
Vampyre,
If you have access to more resources related with the OS list, can you generate a new list with the OS numbers linked with the checksum location for the given OS.
It needs to be a simple text file in the following format.
OS:checksum address
or
9352820:7231a
9352823:7231a
7231a is the address where the checksum is stored for OS p/n ...