VS-VY Enhanced Factory Bins
Re: The1's Enhanced Factory Bins
Could the resolution be changed? Similar to what they use to do with $5D.
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
Not without re-writing the code. Tunerpro is just software that interprets what is in the code in such a way that us mere mortals can understand (the code is all in Hexadecimal which doesn't make sense to the average joe).
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: The1's Enhanced Factory Bins
the XDF info is just axis' to show you and i what the information in the tables are, the only changeable part is the data in the table (not the axis)
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: The1's Enhanced Factory Bins
Does it not have the high rpm extension table seperate
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: The1's Enhanced Factory Bins
VY Supercharged and VT V8 were the only codes i have added RPM to the fuel cut tables. Otherwise there all stock RPM.
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
Hi Mate,
On the VS L67 bin there is a table called Startup Fuel Air Timeout - Decay Delay V's Startup Coolant - P/N/D could you please copy that into the VX L67 bin if possible and get it working?
I'm working on a cold start issue with the colder spark plugs.
On the VS L67 bin there is a table called Startup Fuel Air Timeout - Decay Delay V's Startup Coolant - P/N/D could you please copy that into the VX L67 bin if possible and get it working?
I'm working on a cold start issue with the colder spark plugs.
Re: The1's Enhanced Factory Bins
usually that's not really used, you'd be better off with the Cold Engine idle - Temp Dependent AFR Change V's Coolant - P/N and Drive tables. There is also cranking tables in there to already.
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
Yeah, I'm playing with those but not having a huge amount of luck. I want the idle to hang for a bit directly after starting instead of decaying straight away and that table seems the best option.
Re: The1's Enhanced Factory Bins
ill have a look when i can, havn't touched enhanced in a long time
Re: The1's Enhanced Factory Bins
VY_V6_SC_$07_Enhanced_v1.2h is up with table added