So once i got it home i set about modifying a bench i have, which had a grinder on one end of it but other than that was just a spot to pile shit up, so its certainly being suitably re-purposed now.
So i removed the grinder and board off the top of it.
I then worked out some spare steel i had that would be suitable to do what i needed to mount it.
The notches at the back and the fact it sits higher is to allow the drip tray to sit properly as it had a lip around the outside of it that was lower than the lathe mounting panel.
As you can see a few mm of clearance under the drip tray, and holes/slots suitable for mounting.
Fits on the bench very well, and there will be a nice bit of room left at the end of it to re-mount the grinder and probably some spots to store lathe accessories.
I also have a drill sharpener which doesnt really have a home so it will probably live here too.
The lathe isnt super expensive, but it was in my budget and should cater for most things i need to do.
I has a 38mm spindle bore (most others were 20mm), powered longitudinal and cross feeds, a 600mm long bed, 230mm swing over the bed and almost too many options for cutting threads so im hoping it will be a good thing
![Smile :)](./images/smilies/icon_e_smile.gif)
You can rest assured i will post some more pics or a vid of it in action, at this stage i dont have any tools for it (9 piece tungsten tool set in the post along with a tailstock chuck) and at some stage i want to get a 4 jaw chuck for it too .... oh and probably a knurling tool
![Wink ;)](./images/smilies/icon_e_wink.gif)
Its funny alot of people i talk to ask me why i bought it, what i want to use it for .... i guess they just dont understand how many little things it will come in handy for over the years.
That said i would like to try and turn up some injector bosses (no particular need) and i have a few other things i'd like to try when i get my hands on some other materials just to see how it goes, and my brother gave me a 56mm diameter x 1.5mtr steel rod so i have plenty to play with ahaha!