OSE $12S
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: OSE $12S
isa this just the V8 cal that has the issue or what ? and is it just $12S that has the issue ..... i've never had any issues when running $12S on the ecotec with high rpm pinging ......
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE $12S
It will affect every cal, only above 4800RPM will it be a problem.
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: OSE $12S
interesting, my logs haven't shown the advance spiking over 4800 rpm at all
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: OSE $12S
the slope on the v6's is only set to 2 deg anyway, you only notice the problem on a v8 coz on the v8's it usually has bugger all timing at 4800 and the slope set to 10 deg per 1000rpm.
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: OSE $12S
did a check, was displaying 1 degrees / 1k rpm and after changing the calc its displaying 3.52 degrees / 1k rpm
so pretty much i get another 3.5 degrees after the spark table stops .... cause i only get about 5600-5700 out of the ecotec.
so pretty much i get another 3.5 degrees after the spark table stops .... cause i only get about 5600-5700 out of the ecotec.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: OSE $12S
ok people, for those that already have the zip file in the first post you might want to download it again as it has an updated XDF in it .... most stuff is the same as the original XDF however i have added some of the other lean cruise settings, fixed a few equations and also re-ordered some stuff to have the similar things grouped together and stuff like that .....
at this stage ose $12s v1.01 is the latest.
at this stage ose $12s v1.01 is the latest.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE $12S
Thanks holden202