pcmhacking.net

If the module can output a 4 pulse or 3 pulse the a ls1 pcm can be switched to low resolution and work with 4 pulse v8 or 3 pulse v6 may make it easy to convert v6 to ls1 pcm.
I am looking at vy v6 to ls1 pcm conversion but still looking for bits to try.

but a 24 pulse ls1 running on a 808 should be a good thing to see

When will they be available and is there a wiring diagram for the output/inputs?


Ian

Awesome.

I can confirm there is a wiring diagram for the input/outputs.

Apples wrote:If the module can output a 4 pulse or 3 pulse the a ls1 pcm can be switched to low resolution and work with 4 pulse v8 or 3 pulse v6 may make it easy to convert v6 to ls1 pcm.
I am looking at vy v6 to ls1 pcm conversion but still looking for bits to try.

but a 24 pulse ls1 running on a 808 should be a good thing to see

I know there are people running the v6 off the LS1 PCM. I suspected this is how they did it, let us know if it works for you.

LS1 can be done in realtime with a Moates Roadrunner Emulator but it aint cheap...

yeah, I fail to see the advantage of running an ls1 pcm on a VY V6, surely a VT S/C extended realtime option would be cheaper and more suited?

The only reason is there is no vs mafless auto 2 bar option avalible yet other than kal cost me more.
In my case its v6 twin turbo with a 4l65 auto with 2 bar for wife to drive.
plus I have efi live and hp tuner loggers setup for my ls1 drag cars.
If a vs mafless auto delco hacking tune becomes avalible I will use it.

Do you know what price range they will be when released? They look very promising.
Same as what 202T is running?

mine is a early prototype so there may be some changes, but generally the overall function will be the same, maybe with more features

I know already the connector has changed from the one I have due to it being a pain in the ass to wire up (small crimp lugs) i'm sure VL400 can give you more details on this stuff.