pcmhacking.net

I've got the loom and module coming no ecu. I've put up a post on here chasing a ecu if anyone can help out.
Turns out the Nissan loom is quite well ran, poor fella had a hard time removing it pulled half the dash out.
All I know is Commodores so I couldn't help him but main thing is he got it in one piece.

JUST need a few more bits now then I can start my 202 efi conversion.

You should be able to pick up an ECU off ebay for $30.
There's a post on here somewhere showing how to remove a Pulsar loom - you don't have to touch the dash, it's a 15 minute job when you know the steps

I have a 808 laying around you can have. You pay postage and its yours

; I thought it was a plain unit, but i already soldered the write line, fitted that 101 resistor for a sxr emulator and has the sxr emulator pins soldered on. This will save u mucking around with it. Add the sxr board and off you go with high speed logging.