pcmhacking.net

The flashtool is here .. https://pcmhacking.net/forums/viewtopic.php?f=3&t=82

Try turning off the thermo while the key is on and see if the errors stop.

Hey fellas, just found the problem!

My previous wideband (14point7 spartan) used the ecm ground as its ground, and worked fine. So when I wired my aem in I did the same.

So I unplugged the w/b earth connection to ecm as a pure hunch and it fixed it. So I am stoked.

Maybe this will help someone else out in the future lol

Thanks for all the responses guy. This forum is great

Thanks for getting back with the solution, hopefully can now get some useful info from the ECU.

Holden202T wins the prize* for picking the issue!

* There is no prize

The prize is being able to help someone out!!

Good to see its sorted!! I've had my fair share of wiring issues I know how annoying they can be!!