pcmhacking.net

The right case would have to be an old pole position arcade game that you sit in surely

lol, i'll be happy with just a black plastic one from jaycar i think

i had to order some parts a while ago from farnell and to get the price up to a point where they would allow credit card payment i added a black box to the package, problem is working it out over the net you just can't be sure, in the end i got one thats probably going to be too small for this, so i'll have to go to the local shop and see one in the flesh before i purchase!

i'm sure i'll find a use for the old box sooner or later

What about a micro computer case you might even be able to use the computer power supply as well i am pretty sure they did 5 and 12 v lines handy for the tps supply etc.

nah my box will be probably 10cm by 15-20cm thats all i'll need, and the power supply you can see in the pic is what i have for the test bench, its 13v at 4amp so its plenty for my needs, and TPS and all other sensors are run off pots

build it into an old PCM case...

i don't have any .... all the ones i have are full of pcms and working!

would look cool though, pcm connected to a ecm

ill have a scab around i might have an empty one here somewhere

Rob

don't worry about it thanks, i have a bigger plastic box now!

Vinces post about 02 impala scanning has been split to its own thread for discussion here: https://pcmhacking.net/forums/view ... f=10&t=463

Bruce Plecan, AKA "Grumpy", built a couple of his test benchs into old ECM cases.

For my test bench, I bought a JimStim, that is normally used for testing MegaSquirt ECMs, it works perfect with the Delco ECMs I've used it with.

I need to get some new pictures a lot has changed since I took these:

When I first got it running:




I added dual monitors:




LOL, back before TP RT V5 was released.