Page 2 of 4
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 1:21 pm
by Dylan
No I didn't. I didn't do that as I've never had to with an 808 before just changed the 0 5 volt scalars to correct the reading. Might give that a go as that should get the laptop working then I can use ALDLDroid to log.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 1:44 pm
by Jayme
yeah 424 is different to 808. the input on 808 doesnt have that problem.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 1:47 pm
by Dylan
I'll do that soon. Any thoughts on the logger playback?
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 2:15 pm
by Gareth
Jayme wrote:did you do the resistor removal as specified in the 11P document? some widebands arent strong enough to overcome the 424's pullup resistor.
That one caught me out too
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 2:21 pm
by Jayme
try loading your logs with this adx.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 2:26 pm
by Dylan
Thanks mate can't wait
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 2:34 pm
by Jayme
using the above ADX I can load your log you posted earlier in the thread.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 2:51 pm
by Dylan
What did you find was wrong? Something at my end?
They were unmodified ADX's.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 3:35 pm
by Jayme
the message lengths were wrong and had to be increased by 2
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 4:20 pm
by Dylan
Would that likely to be wrong for everyone else? Every 11P logger adx? There's a few different one's in the zip.