pcmhacking.net

Thanks all the posts helpful.(cutting off the key ways on the side of the plugs made life easy)

Q: I've got one ECU with the pink & blue connections Service 16233396 3.8L AUT PCM 09351915 CJKU with coma failure, the harness is ok on other ECU's I've noticed the on the bench the working ECU draws about 200 ma at 12.5 volts this faulty ECU only draws 20 ma it's only a bench test unit not sure of the history got an idea it was found at wreckers, yet to inspect the PCB but been keen to hear any tips ..

Thanks
F

Hey guys i have no wire in either ALDL Pin 6 or ECU plug D09? Cant get the ecu to connect on the bench and have wired it as described in this thread bar those 2 wires.