XDFs

American Delco GM ECUs and PCMs, ALDL, OBD 1.5.
User avatar
antus
Site Admin
Posts: 10014
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: XDFs

Post by antus »

Thanks for posting!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
dzidaV8
Posts: 41
Joined: Thu Jun 01, 2017 8:07 pm
cars: 2006 Pontiac GTO
1992 Pontiac Trans Am Convertible
1988 Pontiac Firebird L31 Vortec swap
Location: Poland

Re: XDFs

Post by dzidaV8 »

Version 4 of my 12212156 XDF.

Added new parameters:
- Cranking VE Baro Multiplier and Calibration Temperature,
- Commanded Fuel For Extended Cranking,
- MAF Airmass Filter,
- Dynamic Airflow parameters,
- VE Correction parameters,
- Priming Pulses parameters,
- PE enable parameters,
- LTFT deadband, update rate, and filters,
- Idle STFT parameters,
- Torque Management parameters,
- Coil Dwell Time parameters,
- Shift Light parameters

New categories, better parameter descriptions, more organized category view.

I think this XDF is pretty much finished, tested on a dozen of cars and works perfectly!
You do not have the required permissions to view the files attached to this post.
User avatar
antus
Site Admin
Posts: 10014
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: XDFs

Post by antus »

Good work. Thanks for that!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
antus
Site Admin
Posts: 10014
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: XDFs

Post by antus »

Adding my checksum plugin which is required for the Operating System segment for dzidav8's XDFs above.
You do not have the required permissions to view the files attached to this post.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
KD500-1
Posts: 2
Joined: Tue Nov 13, 2012 6:08 pm

Re: XDFs

Post by KD500-1 »

Does anyone on the forum have a copy of the EBL Classic V1.26 software package?
If so, could you send it to me, or post it on this forum site?
Thanks in advance!