Memcal ID Tool with Data Version 1.11

[The1]

Ive done a few updates now, if anyone has more bins, xdf's, information or correction of my misinformation please let me know!!

[Holden202T]

Yeah its a vl bin , it has an option where you can connect a variable resistor to the 808 ecu and adjust the fuel mixture when running .

Sounds like a mod typical of touring car days

[The1]

ok all we have reached 0.9 pretty much all data and files i have been able to find have been entered so dig in

[The1]

0.94 is done now, should work better, doesn't need .net4 anymore and fixed issues people told me about, included antus bin id program in it as well.

[The1]

Ok ive started making my own integrated version of ID Tool, thanks for antus's tips, can i get some people to test this out on your own modded bins, ive just done it for VS V6 for a test $51 & $76 including supercharged bins, see if it id's them, it checks the 6000 - 7FFF area and runs a MD5 on it.

[antus]

Yep, tested it on some VS bins and it worked fine

Suggestion: Can you make it remember the last directory and default to that location when you try and load the next bin? Can save a lot of clicks if you have a couple to do and they are all stored together!

[The1]

Yay thanks antus, yep reuploaded the test again above, see if it remembers it for you.

[antus]

Yep, heaps easyer to try a bunch of them one after the other

[The1]

reupdated the above file again, now includes VS - VY V6 & VTV8, ill get the others in sometime.

[The1]

Ok try this version out with ID tool, should work with everything, throw it all at it and see what brakes, lemme know if ranges or detection is wrong