Page 2 of 5
Re: vr 355 bin files
Posted: Fri Jan 14, 2011 7:52 pm
by nig087
94 vr manual engine specs are 355ci 10.5.1 craneH304 bluetops starr90mm 3'exhaust
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 6:32 pm
by TTVN
edit
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 8:23 pm
by nig087
i put the tune in but it runs the same rich and won't idle the best i can get the idle at is 1500 any less it drops off and i need the fans set to 95c as i have electric fans
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 8:36 pm
by nig087
theres are tune i found i put this one in it idles and doesn't run rich but theres no topend and engine light and fans are on
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 8:58 pm
by TTVN
if eng light and fans on it was a bad tune or bad burn its running full limp mode
pull ve down low out of the tune i posted and add idle spark and some low rpm spark
dont touch injector size as the ve table is maxxed out at pk tq
what are you tuning with ????
vl400 setup or ostrich or burning eprom/eeproms
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 9:07 pm
by nig087
tunerpro rt and burn2 burner could you adjust it and set fans to 95c and post bin back up
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 9:11 pm
by TTVN
edit
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 9:17 pm
by TTVN
here is a link to the file package use it in tunerpro to adjust if you need to
https://pcmhacking.net/forums/download ... hp?id=1722
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 9:47 pm
by nig087
put tune in got it to idle at 1000 but still rich stine eyes and when fans come on idle drops off engine stalls
Re: vr 355 bin files
Posted: Sat Jan 15, 2011 9:52 pm
by delcowizzid
stings your eyes is lean many people make that mistake thinking its richness