DELCOS NEW RIDE

[vlad01]

we all holden mad the vb owner has 6 holdens right now LOL

Note to anyone reading when you are setting up efi on anything dont just look at the nipple size on the fittings and think they look fine LOL. just stripping the inlet manifold for the 202 turbo so it can be painted and ummm map sensor was on a 5mm nipple but the threaded end of the fitting has a 1mm hole GOTCHA bloody scumbag bet that didnt help the headgasket LOL fuel reg vac sorce nipple wasnt much better hahahaha

thats not too much, I had 6 just the other week but I got 3 good keepers now plus one parts car left.

can never have enough holdens I reckon.

[delcowizzid]

202 in the hole few little bits to go

DSC_0139_zps4786c06b.jpg (77.16 KiB) Viewed 3070 times

[delcowizzid]

its aliiivvvvvvve ahahahaha sounds sick as hell LOL and even with the drop in comp and the cam its just as responsive as it was if not better and it seems to have more torque when letting out the clutch havnt driven it but all run in ready for some tuning to get it to idle its a tad richer than it used to be LOL
[youtube]https://www.youtube.com/watch?v=OQPDEwfwRIQ[/youtube]
[youtube]https://www.youtube.com/watch?v=huBrGQpdZFk[/youtube]
[youtube]https://www.youtube.com/watch?v=JCwc-AHtUiw[/youtube]

[VL400]

Nice work

Pretty sure holden202T is still busy watching and listening to the videos

[Holden202T]

hahaha yeah started to watch one and then a customer came in, then 1.5 hrs later im back

yeah definitely sounds rich at idle!

keen to see some on road testing vids

[delcowizzid]

yeah its on the old tune no changes at all high 11's-12's fuel ratio dont think the cold plugs like it to much either LOL cant wait for a drive

[Holden202T]

mine was the same when i first got it going with a bigger cam, this video is loading it on the trailer for the hill climb, and the day before at 1pm i bedded the cam in and really just roughly got it going for the hillclimb it sounds so much less cammy and rough compared to that vid hehe

[youtube]http://www.youtube.com/watch?v=Uwo7t46uCt0[/youtube]

[delcowizzid]

log file for anyone interested
use 12p V112 3bar petrol adx

dans bp.xdl

(228.32 KiB) Downloaded 247 times

cars running not too bad few to many throttle follower iac steps made it a bit unnerving felt like the throttle had stuck when changing gears
IAT in the runner definately picks up more heat change than in the plenum needs some tuning of the charge temp table it idled weird when pulling up with cold IAT but came right once stationary for a while and heat soaked back in

[delcowizzid]

Built exhaust and started tuning got it engineered today. Full 3" exhaust with hotdog and big resi sounds like a stock 202 ultimate sleeper now lol. On boost at 2500 at 1/3rd throttle drives like a stock 202 just lots more torque and plenty hp for 7psi

[Holden202T]

hahaha nice, gotta love a good old holden sleeper