Page 107 of 166
Re: DELCOS NEW RIDE
Posted: Sun Oct 05, 2014 12:51 am
by vlad01
delcowizzid wrote:we all holden mad the vb owner has 6 holdens right now LOL
Note to anyone reading when you are setting up efi on anything dont just look at the nipple size on the fittings and think they look fine LOL. just stripping the inlet manifold for the 202 turbo so it can be painted and ummm map sensor was on a 5mm nipple but the threaded end of the fitting has a 1mm hole GOTCHA bloody scumbag bet that didnt help the headgasket LOL fuel reg vac sorce nipple wasnt much better hahahaha
thats not too much, I had 6 just the other week but I got 3 good keepers now plus one parts car left.
can never have enough holdens I reckon.
Re: DELCOS NEW RIDE
Posted: Fri Oct 10, 2014 1:13 am
by delcowizzid
202 in the hole few little bits to go
- DSC_0139_zps4786c06b.jpg (77.16 KiB) Viewed 3081 times
Re: DELCOS NEW RIDE
Posted: Wed Oct 22, 2014 9:14 pm
by delcowizzid
its aliiivvvvvvve ahahahaha sounds sick as hell LOL and even with the drop in comp and the cam its just as responsive as it was if not better and it seems to have more torque when letting out the clutch
havnt driven it but all run in ready for some tuning to get it to idle its a tad richer than it used to be LOL
[youtube]
https://www.youtube.com/watch?v=OQPDEwfwRIQ[/youtube]
[youtube]
https://www.youtube.com/watch?v=huBrGQpdZFk[/youtube]
[youtube]
https://www.youtube.com/watch?v=JCwc-AHtUiw[/youtube]
Re: DELCOS NEW RIDE
Posted: Thu Oct 23, 2014 10:02 am
by VL400
Nice work
Pretty sure holden202T is still busy watching and listening to the videos
Re: DELCOS NEW RIDE
Posted: Thu Oct 23, 2014 11:06 am
by Holden202T
hahaha yeah started to watch one and then a customer came in, then 1.5 hrs later im back
yeah definitely sounds rich at idle!
keen to see some on road testing vids
Re: DELCOS NEW RIDE
Posted: Thu Oct 23, 2014 1:30 pm
by delcowizzid
yeah its on the old tune no changes at all high 11's-12's fuel ratio dont think the cold plugs like it to much either LOL cant wait for a drive
Re: DELCOS NEW RIDE
Posted: Thu Oct 23, 2014 2:54 pm
by Holden202T
mine was the same when i first got it going with a bigger cam, this video is loading it on the trailer for the hill climb, and the day before at 1pm i bedded the cam in and really just roughly got it going for the hillclimb it sounds so much less cammy and rough compared to that vid hehe
[youtube]
http://www.youtube.com/watch?v=Uwo7t46uCt0[/youtube]
Re: DELCOS NEW RIDE
Posted: Mon Oct 27, 2014 3:45 pm
by delcowizzid
log file for anyone interested
use 12p V112 3bar petrol adx
cars running not too bad few to many throttle follower iac steps made it a bit unnerving felt like the throttle had stuck when changing gears
IAT in the runner definately picks up more heat change than in the plenum needs some tuning of the charge temp table it idled weird when pulling up with cold IAT but came right once stationary for a while and heat soaked back in
Re: DELCOS NEW RIDE
Posted: Thu Oct 30, 2014 9:37 am
by delcowizzid
Built exhaust and started tuning got it engineered today. Full 3" exhaust with hotdog and big resi sounds like a stock 202 ultimate sleeper now lol. On boost at 2500 at 1/3rd throttle drives like a stock 202 just lots more torque and plenty hp for 7psi
Re: DELCOS NEW RIDE
Posted: Thu Oct 30, 2014 9:49 am
by Holden202T
hahaha nice, gotta love a good old holden sleeper