pcmhacking.net

Ahh ok no worries Antus, Pretty easy fix which is great, Will get rid of files and start fresh

Got the Log done

These are the files i have used

does the timing and base injector rate and everything look ok, The1 told me the base injector rate for the L67 36LB injectors and i have changed that and re-flashed the Bin & Cal files but the engine still won't start, It sounded more promising though but won't stay running, In the Log i was cranking for a while than paused and cranked again for a bit, Done that a few times to get a better Log

Please help, anyone.

anyone out there ??

I’m not in front of a computer so can’t check the files, but make sure you also change the cranking fuel times as with larger injectors will be flooding the engine when cranking. Look at a supercharged VT-VY bin and see what it uses for cranking fuel and copy over.

Thanks for the reply, Ok no probs will do that right now, Ive also changed the base injector rate as per what The1 has told me - 213.87 MSEC/GRAM

Not sure what's going on but every time i try to compare files some whacky looking numbers come up, Am i doing something wrong ?? lol

Im not in front of a pc, but your comparing a $060a and an $07 so the same xdf wont work for both at the same time. Look under tools and you can launch a second copy of tunerpro then you can have a bin with its matching xdf in both copies.