Delco probie

[Dec_head]

Sometimes bad coil packs leads or plugs lead people to believe the transmission is bad in the vs vt v6 it seems to be quite common.
Quite often it is the engine misfiring upon shifts or not running on all cylinders etc.

[Mamba]

Never thought of that to be honest...thanks for the tip Dec_head.....maybe the new plugs making a bigger difference than expected...

Norton finally let me download the ose enhanced flash tool v127...took a few attempts before norton finally gave up (happens apparently) but downloaded now..just have to set it up to read the ecu and get those calcs....even with a reset ecu and new sensors, acceleration is still wanting...took a log ahortly after the car was back together and had been driven....acceleration still shows a lean out but the sensors are at least both working...at this point, the sensors have not been corrected for the earthing problem....that is to come...

Vs V6 engine and trans 1.07 –tp5.adx with Tunerpro RT 5.00.6356.00 used..

[Jayme]

well thats half ya problem throw that norton crap away, its the biggest waste of system resources.

[Dec_head]

I have been using a free internet security for a few years now from http://www.comodo.com/products/free-products.php
Never had any dramas.
I also use http://www.superantispyware.com/download.html it's been good to me as well.

[Mamba]

I use superantispyware at the moment but haven't heard of comodo...good to know!!..thanks Dec_head norton can be challenging

after loading VL400's ose enhanced flash tool v127 and connecting it up with the FTDI usb (also VL400's)....all the info downloaded without any issues...first time!!...connected, found hardware and downloaded everything perfectly with no problems whatsoever....what can I say VL400 ...anyway..antus has checked it over for me and recommended that I post it to the board.....still not sure what bin it relates to but interesting anyway....thanks again for all the great help from members ....

[VL400]

Glad it worked well for ya

Your memcal is BSTK 1451, which can be downloaded from here if you want the whole thing ... https://pcmhacking.net/forums/viewtopi ... 7&t=3#p231

[Mamba]

It worked really well...both the program and the usb!! ...thanks for the info and assistance VL400....been frustrating not knowing what was running the engine....I know all the members work as a team and what a team .....you guys are amazing!!...thankyou...

next question is that it was replaced due to cold start hesitation and pinging (no sh##@@!!)....approach holden for the replacement??....not sure what to do next...

was originally told by a holden auto tech that I had a "lazy" starter motor that needed replacing ...

[Holden202T]

i'd recommend getting another memcal and burn the required bin onto it .... or send it to someone and they'll replace the tune on it

[Mamba]

Thnaks for the advice holden202.....just for info...approached holden for advice about the memcal.....a guy in spares contacted someone in victoria who in turn provided the following advice...they confirmed that BTXP was the correct memcal and for holden to fix it required me to provide details of the cars vin...a memcal costs $204.60 not including postage from vis or installation, but holden would require the vehicle and all keys forpart of the day....although a total cost could not be given as they hadn't done it before....

[Dec_head]

wich one do you want i can have a look through i have a few vs standard memcals.
Just looked i have a heap of BWPJ1640 $51 3.8L Auto 16199728 Revised CanPurge, Cold Hesitation and Ping fix
and one brhp6563.