Page 16 of 43
Re: Couldnt really find a section for this..
Posted: Sun Sep 11, 2011 12:11 pm
by antus
Hi ZerOne, and welcome aboard!
I found your doco on the VE cluster, and it looks very good. Theres no problem with having a direct link here, so i'll post it:
http://www.carmodder.com/doc-holden-com ... 57m19.html
Thanks for contributing!
Re: Couldnt really find a section for this..
Posted: Sun Oct 02, 2011 7:10 pm
by 88GreenVN
I have been following this post and got a bit lost on the page that talks about hooking up the iscp to the chip
From what I have read (please please correct me if I am wrong)
wire up the iscp - chip
pin 1-3 di
pin 2-8 vcc
pin 2-6
pin 2-7
pin 3-1
pin 4-5 gnd
pin 7-2 clk
pin 9-4 do
Looking forward to your great help.
Thanks.
Re: Couldnt really find a section for this..
Posted: Sun Oct 02, 2011 7:21 pm
by The1
check my post page 14
Re: Couldnt really find a section for this..
Posted: Tue Oct 04, 2011 12:58 pm
by 88GreenVN
The1 wrote:check my post page 14
Cheers - I've ordered the reader gadget and dragged out all the stuff we were playing with 2 years ago - ready for another crack at this. I'll lset you know when we make progress.
Re: Couldnt really find a section for this..
Posted: Tue Oct 04, 2011 6:01 pm
by 88GreenVN
When using PonyProg, what device are you using? I have tried 93x6 9356 and 24xxx auto ?
I am getting bus busy or hardware error
Or are you using a different program.
Thanks.
Re: Couldnt really find a section for this..
Posted: Tue Oct 04, 2011 6:28 pm
by The1
X2444 16bit and off jumpers
Re: Couldnt really find a section for this..
Posted: Tue Oct 04, 2011 7:26 pm
by 88GreenVN
I am running v1.7 and in the device list I have no X2444 option only x24xx auto under the i2c buss eeprom
Re: Couldnt really find a section for this..
Posted: Tue Oct 04, 2011 7:32 pm
by festy
It's been in the codebase since 2007 from memory, might be time to upgrade
Re: Couldnt really find a section for this..
Posted: Tue Oct 04, 2011 8:28 pm
by 88GreenVN
my bad... Now I can read the chip just not write to it.
All good fun!
Re: Couldnt really find a section for this..
Posted: Tue Oct 04, 2011 8:41 pm
by festy
Is it being read correctly?
Does the bin look right?