That's what I thought. Ita was definetely 45 not 4.5 or anything.
Should of took screen shot or a log.
ALDL ECU's
Re: ALDL ECU's
Hmmm,Holden202T wrote:if your referring to the injector monitor then it should be about the same as the battery voltage ..... so I would say no not 45 volts hahaha!
Ill post up the calculation I have for the injector voltage.. see if thats correct.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: ALDL ECU's
x * .1 in the two adx's I checked.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: ALDL ECU's
If im not confusing myself again.. doesnt VS S3 V8 communicate the same as a VT, but it doesnt use a VT BCM.Holden202T wrote:x * .1 in the two adx's I checked.
Soooo what I have recorded is:
(((22.39-7.35)/51)*x)+7.35
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 1217
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: ALDL ECU's
That looks like a wideband O2 equation to me.
Re: ALDL ECU's
I think Iv managed to name that incorrectly lolyoda69 wrote:That looks like a wideband O2 equation to me.
*Edit
Yeah I totally did.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: ALDL ECU's
Hahahaha that would do it!
Stock tune will show injector voltage monitor, modified to use the injector monitor line as a wideband input and your equation will be accurate tazzi.
Stock tune will show injector voltage monitor, modified to use the injector monitor line as a wideband input and your equation will be accurate tazzi.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: ALDL ECU's
Managed to fix up some little bugs in AED. Specifically I introduced a bug into the latest version when adding 3parameters to show on the graph and it was not reading/saving the files correctly for replaying.
Also changed the "fault code" display for VU/VX/VY V6 commodores to display as the "P0123" notation.
Annnnnnnd a few other tweaks here and there.
Will be pushing update soonish after a few other small changes... like fixing the silly wideband O2 equation
Also changed the "fault code" display for VU/VX/VY V6 commodores to display as the "P0123" notation.
Annnnnnnd a few other tweaks here and there.
Will be pushing update soonish after a few other small changes... like fixing the silly wideband O2 equation
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726