VS-VY Enhanced Factory Bins

[DavoF]

If anyone can hit the 1650 cylair limit I'll extend the range further

If anyone gets to those sort of figures then they'd be down to their rims spraying sparks in no time

[The1]

ok ive put up VS V6 N/A enhanced version 1.3, i have added

the missing injector table for 593-977
Cleaned/fixed up history tables
injector multiplier output into the datalogs
Wideband AFR Vs Target AFR calc for datalogs & History Table
added the extra tables 14 for 16226hz limit for MAF
changed IAT Spark tables for full 93-977 range and full temperature range as per below, im think ill use this format for the S/C tables, will just need to find room.

iat temp.jpg

[The1]

Here's some further info on the card style MAF's These are used on the LS7 from what i can find out.

It's still Dephi and the part numbers are Delphi#AFH70M-43A or GM#15865791

You can pickup brand new OEM ones on ebay cheap by the looks along with places making tube adaptors for them, not cheap though.
http://www.ebay.com.au/sch/i.html?_odkw ... 1&_sacat=0

Im going to order one and see what it's frequency range is, some forums suggest 15-16k hz is no problem, will also need to see what it's bottom end is like to.

[VX L67 Getrag]

Looks the goods, it's ridiculous there charging more for the adapter then the MAF itself!

For testing looks like you can get the sensor for $40 inc. delivery & be able to mount it quite easy in a PVC pipe without too much trouble!

[The1]

$54 delivered it cost me for GM Brand new one.

Yeh you should be able to cut up two pieces of thick acrylic or plastic, cut out a slot and sandwich bolt it into the intake pipe, all of a few $. Being card style should be less restrictive.

[The1]

Got the LS7 Card MAF in the mail today, did some bench testing, max hz seems to float around this, a little more than the 14700 than the LS6 maf, but was kinda hoping it would go all the way to 16000hz, anyway.

Also this is the pinouts for it, the plug is also different size to the LS6 plug, i havn't looked around to see if someone has a splitter available for these yet but would be surprised if there wasn't

A - (MAF) Sensor Signal
B - Ground
C - +12V
D - Ground
E - Intake Air Temperature Sensor Signal

[The1]

VS & VT V8 5.0L Bins and XDF's fixed up, 14 MAF tables.

[Helical]

Awesome! Thank you.

[The1]

Sorry for the lack of updates on the new code, day job is hektic with layoffs but i have managed to do the IAT Spark code and test on a boosted car with VR IAT sensor in the LIM and all works perfectly. I have one extra code part to do then VT S/C will be released, Followed by VX S/C, VY will be a little while off more work as there is less free cal room.

IATSPARK.jpg

[VX L67 Getrag]

AWESOME work as always The1! NICE WORK!!!