Page 3 of 3
Re: VR auto to manual conversion.
Posted: Wed Jul 17, 2013 7:59 pm
by vlad01
I figured they are Siemens deka. I had seen close up pick of them before somewhere and they say deka on the side near the o rig at the top so they should be good. I'll see if I can find the PN.
Re: VR auto to manual conversion.
Posted: Wed Jul 17, 2013 8:05 pm
by antus
Nah, they're not dekas. Dekas are advertised as such. They do say Siemens, but are probably close to or exactly stock flow rate.
Re: VR auto to manual conversion.
Posted: Wed Jul 17, 2013 8:11 pm
by vlad01
Re: VR auto to manual conversion.
Posted: Wed Jul 17, 2013 8:15 pm
by antus
ahh i see. i didnt realise the small ones were dekas too. i still wouldnt trust an ebay pic. Personally i'd ask the seller for a part number then go from there. A bit of ebay skepticism might save you.
Re: VR auto to manual conversion.
Posted: Wed Jul 17, 2013 8:26 pm
by vlad01
read my mind, already did sent a message for PN. I checked the VDO site and they do make replacement injectors although they do not provide info about the replacement part range, performance injectors they do.