Page 3 of 3
Re: How to setup of Knock Sensor for VN V8
Posted: Fri Nov 08, 2013 4:53 pm
by vlad01
immortality wrote:Bahhh, I was never fan of the Walkinshaw model, to much body kit for me, wouldn't mind getting hold of the intake manifold though, there still isn't much better for an EFI Holden V8.
Just read the bin and upload it here on the website.
yeah I thought it was one of those models where people pinch parts from it to use for their projects.
Re: How to setup of Knock Sensor for VN V8
Posted: Fri Nov 08, 2013 5:11 pm
by eckermannk
im just gunna pinch the knock board. Ill send the chip onto anyone who has the capability to get the tune out of it and put it up on the forum.
Re: How to setup of Knock Sensor for VN V8
Posted: Fri Nov 08, 2013 6:17 pm
by VL400
If the silver sticker stuck to the EPROM in the memcal is AMBX6968 then the bin is in the MemcalID tool
Re: How to setup of Knock Sensor for VN V8
Posted: Thu Nov 14, 2013 1:57 pm
by eckermannk
The Delco sticker is AMBX7274
Re: How to setup of Knock Sensor for VN V8
Posted: Thu Nov 14, 2013 2:13 pm
by immortality
That is a new one. Definitely need to get that read and posted on the website.
Re: How to setup of Knock Sensor for VN V8
Posted: Thu Nov 14, 2013 3:16 pm
by eckermannk
Quite happy to send it to someone that is capable to do it. Could I do in myself with the setup i have?
Re: How to setup of Knock Sensor for VN V8
Posted: Thu Nov 14, 2013 3:20 pm
by eckermannk
Knock sensor and board installed
Now what parameters do i need to switch and and setup?
Map A: set=Knock logging enabled. = SET
Any others
Re: How to setup of Knock Sensor for VN V8
Posted: Thu Nov 14, 2013 6:16 pm
by antus
I can read AMBX from the chip, pm sent.
Re: How to setup of Knock Sensor for VN V8
Posted: Thu Nov 14, 2013 6:38 pm
by delcowizzid
set ESC params - Coolant temp enable in scalers to a lower temp 40 degrees or something