Page 3 of 3
Re: Help with burning to an SST27SF512
Posted: Mon May 18, 2015 11:03 pm
by The1
i have to do this with my supplies, i give up random chips in each batch to do a 1000cycle script test on them and make sure there upto the task. They 28pin chips are getting harder to find in old stock.
Re: Help with burning to an SST27SF512
Posted: Tue May 19, 2015 6:44 am
by zspanners
They did not come from Ebay , but from a local supplier and are supposed to be from Moates.
The supplier is going to sort it out , however much time has been lost in tacking the issue down.
Thanks to everyone for input to help track this down.
Zspanners.
Re: Help with burning to an SST27SF512
Posted: Tue May 19, 2015 5:59 pm
by j_ds_au
The1 wrote:They 28pin chips are getting harder to find in old stock.
Yeah, for current IC production you'd have to use the PLCC32 version (GLS27SF512-70-3C-NHE) with something like the following adaptor (beware, pins may be too thick, in which case you'd have to replace them) :
http://www.ebay.com.au/itm/281672748217
Joe.