Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 5:20 pm
yeah just the ones with the AUX data added.
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
Logger V2 11P ADX
Page 3 of 4
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 6:20 pm
I've attached a screen shot, I ran Jayme new test2 adx but still the same for me. I opened both the log's from the previous page but they wouldn't play any data for me. Was I supposed to do anything else besides load up the new adx?
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 6:45 pm
I've had issues with no data showing in the monitors screen on replay. Try rebooting and reloading tunerpro, reload the ADX and then try it again.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 6:53 pm
Thanks mate. It's certainly putting up a fight. I will load a 12p log and adx to confim.
It worked for Jayme so there's hope for me.
It worked for Jayme so there's hope for me.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 7:03 pm
yeah ... sorry, I loaded one of my own logs by accident not yours.... yours still doesnt work 
ill keep looking.
ill keep looking.Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 7:07 pm
What was your log, an 11P from a logger? Is it something I've done?
I would of thought someone else would of notuced a suss ADX by now there's a few loggers around.
I would of thought someone else would of notuced a suss ADX by now there's a few loggers around.
Re: Logger V2 11P ADX
Posted: Tue Mar 15, 2016 7:13 pm
yeah mine was an 11p log but without aux data enabled. it possibly isnt related to message lengths though, as my log still loads when I stuff up the message lengths.
Re: Logger V2 11P ADX
Posted: Wed Mar 16, 2016 10:54 am
I removed the pull up resistor and wideband works a treat now into the PCM.
I'm logging with ALDLDroid now with stock 11P ADX and works fine so this gets me going.
I have another car lined up running a 424 PCM next. Jayme if you'd like to keep playing with these logger ADX's I can do testing whenever you need if it helps. And thanks for your help so far too.
I'm logging with ALDLDroid now with stock 11P ADX and works fine so this gets me going.
I have another car lined up running a 424 PCM next. Jayme if you'd like to keep playing with these logger ADX's I can do testing whenever you need if it helps. And thanks for your help so far too.
Re: Logger V2 11P ADX
Posted: Wed Mar 16, 2016 11:08 am
you can use your logger with the non-AUX ADX and it should work fine. its only the adx that includes aux data that is stuffed.
Re: Logger V2 11P ADX
Posted: Wed Mar 16, 2016 11:23 am
I have ongoing issues using the aux inputs on the logger with a modified ADX to suit VR V8 with BLCC $11 tune which is what the 11P is based off.
Last time out, we were logging fuel pressures on the Aux inputs, live display worked fine but no data in the log for the aux inputs, other data was still there. Haven't had the vehicle back to do further testing with unfortunately but last I spoke to VL400 it seems that my data packets size was also off by 2.
I have used the logger with aux inputs on other models/tunes and they work fine so it would suggest the issue lies with the code related to $11 BLCC only.
Last time out, we were logging fuel pressures on the Aux inputs, live display worked fine but no data in the log for the aux inputs, other data was still there. Haven't had the vehicle back to do further testing with unfortunately but last I spoke to VL400 it seems that my data packets size was also off by 2.
I have used the logger with aux inputs on other models/tunes and they work fine so it would suggest the issue lies with the code related to $11 BLCC only.