Page 3 of 3
Re: Vn/vp Wirring diagrams
Posted: Fri May 24, 2019 12:10 pm
by Holden202T
just as a side note, that wire along with the fan wire are in the grey connector on the drivers side of the engine (plugs into the loom near the battery on a commodore)
Re: Vn/vp Wirring diagrams
Posted: Sat May 25, 2019 12:58 pm
by Humptydumpty
Thanks ledgends
The fuel pump is now working through the ECU
Now in reg to the EFI - is it normal that both wires on a injector have a positive ? I tested to see if it was getting a pulse and was surprised when both wires lit up the test light.
Re: Vn/vp Wirring diagrams
Posted: Sat May 25, 2019 2:43 pm
by FXST02
I believe the ECU grounds out the injectors to make them deliver fuel, so 12v on both sides when not running is correct.
Re: Vn/vp Wirring diagrams
Posted: Sat May 25, 2019 8:32 pm
by Humptydumpty
Awesome thanks